Email:sales@gzcomm.com Service hotline:86-15876566237 facebook
18-Port Gigabit Intelligent PoE Switch
300W 16*Gigabit PoE ports + 2*Gigabit uplink SFP ports
GZM-1000-2F16P-200
Transmission Rate:10/100/1000Mbps
PoE Ports:16*10/100/1000Mbps PoE Ports
Working Temperature:-10~50°C
Certification:CE FCC RoHS
PoE Standard:IEEE 802.3af/at
5 Ports Industrial PoE Switch
4*10/100/1000BASE-TX+1*SFP Uplink Port
Model Number:GZMI-1000-1F4P
Transmission Rate:10/100/1000Mbps
Ethernet Ports:4* 10/100/1000Mbps RJ45 Ports
Uplink Ports:1*1000Mbps SFP Slot
PoE Standard:IEEE 802.3af/at
Function:POE
Certification:CE FCC RoHS
DWDM MUX DEMUX
DWDM system supports ultra-long-haul transmission via a single fiber, coupled with DWDM MUX/DEMUX and OADM with speed protocols of up to 100G/200G per channel.The DWDM passive Mux/Demux modules deliver the benefits of a Dense Wave Division Multiplexer in a fully passive solution.
CWDM MUX DEMUX
CWDM system utilizes advanced thin-film-filter technology designed for use with less expensive, non-temperature-controlled lasers of MUX/DEMUX, OADM and CWDM transceivers.The CWDM Mux/Demux covers all channels from 1270nm to 1610nm in 20nm increments.
Fiber Optic Attenuator
Fiber optic attenuators are used in the fiber optic communications to reduce the optical fiber power at a certain level, the most commonly used type is female to male plug type fiber optic attenuator, it has the optical fiber connector at one side and the other side is a female type fiber optic adapter .
Fiber Optic Pigtail FC SC ST LC MTRJ E2000 Series
The product range covers both single mode and multimode patch cords and pigtails.which are fully qualified to RoHS standards. Fiber Optic Pigtails are utilized to achieve accurate mounting for precision alignment of fiber optical components. Assemblies are available in all major fiber optic connector types; a range of cable color options available
Fiber Optic Adapter LC SC FC MPO Series
Adapter is a mechanical device designed to align fiber optic connectors. It contains the interconnect sleeve that holds two ferrules together. They are used to connect optical fiber connectors of the same type, such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO ect, widely used in optical fiber communications equipment, measuring appliance and so on, the performance stably reliable.
Fiber-Optic Patch Cord
GZCOM optical fiber patchcord( fiber jumper)with ISO9001 and 14001 certification ,ROHS. sometimes called a fiber optic patch cord is a length of fiber cabling fitted with LC, SC, FC,MTRJ or ST fiber connectors at each end.The LC, a smaller form factor fiber optic connector, is most commonly used. Fiber jumpers also come in hybrid varieties with one type of connector on one end and another type of connector on the other.
5 Ports Industrial PoE Switch
4*10/100/1000BASE-TX+1*RJ45 Gigabit Uplink Port
Model Number:GZMI-1000-1U4P
Transmission Rate:10/100/1000Mbps
Ethernet Ports:4* 10/100/1000Mbps RJ45 Ports
Uplink Ports:1*1000Mbps RJ45 Port
PoE Standard:IEEE 802.3af/at
Function:POE
Certification:CE FCC RoHS
6 Ports Industrial PoE Switch
4*10/100/1000BASE-TX+2*Gigabit SFP Port
Model Number:GZMI-1000-2F4P
Transmission Rate:10/100/1000Mbps
Ethernet Ports:4* 10/100/1000Mbps RJ-45 Ports
Uplink Ports:2*1000Mbps SFP Ports
PoE Standard:IEEE 802.3af/at
Function:POE
Certification:CE FCC RoHS
8 Ports Industrial PoE Switch
8* 10/100/1000Mbps RJ45 Ports
Model Number:GZMI-1000-8P
Transmission Rate:10/100/1000Mbps
Ethernet Ports:8* 10/100/1000Mbps RJ45 Ports
PoE Standard:IEEE 802.3af/at
Function:POE
Certification:CE FCC RoHS
9 Ports Industrial PoE Switch
8*10/100/1000BASE-TX+1*SFP Uplink Port
Model Number:GZMI-1000-1F8P
Transmission Rate:10/100/1000Mbps
Ethernet Ports:8* 10/100/1000Mbps RJ45 Ports
Uplink Ports:1*1000Mbps SFP Slots
PoE Standard:IEEE 802.3af/at
Function:POE
Certification:CE FCC RoHS
Shenzhen GZCOM Communication Co., Ltd  Copyright 2019-2024  
Address:401,Chuangkehui Building, Jinhetian Industrial Center,Shenzhen Guangdong
Service hotline 86-15876566237